The hydraulic guide rail lifting platform is a rotating equipment. If it is not operated according to the specifications during use, it is easy to cause some safety accidents. Therefore, operators must understand the standard operating instructions before use and must not be careless. Below are some safety precautions for using hydraulic guide rail lifting platforms.
1. Regularly inspect the lifting and lowering equipment for loading and unloading to ensure the safety of the lifting and lowering equipment, and to ensure that there will be no safety accidents when feeding the guide rail lifting platform.
2. Do not stand within the designated area for placing material rolls. The guide rail lifting platform should be marked with a no go zone to prevent any personnel from entering or standing.
3. Do not stand next to the guide rail lifting platform during loading and unloading.
4. Old or problematic lifting equipment should not be used to replace the work of loading and unloading on the guide rail lifting platform.
5. Before loading onto the guide rail lifting platform, it is necessary to confirm that the weight of the loading is within the rated load capacity of the platform. Do not load rolls that exceed the limit of the platform, as it may cause damage to the machine.
6. Ensure that the radius/outer diameter of the guide rail lifting platform is fully wrapped around the material roll.
7. Warning lights should be installed around the guide rail lifting platform to alert workers and prohibit unauthorized personnel from entering the work area during loading and unloading.
8. Draw a no go zone in the area where the guide rail type lifting platform passes through to ensure that there are no foreign objects in the area and keep it clean.
Your message must be between 20-3,000 characters!
