Lift are widely used mechanical products nowadays, and they are commonly used in many places, especially aluminum alloy lifts. Due to their lightweight, they are widely used in some mechanical industries. Below, we will introduce what to pay attention to when using aluminum alloy lifts safely.
Before use, it is necessary to remove any electrical appliances and debris that may hinder the operation near the aluminum alloy lift, and check whether the operating handle can be used normally. Try to use the equipment in areas with wind speeds below level 5. If the wind is too strong, try not to use it to avoid accidents.
Attention should be paid to the oil leakage problem of aluminum alloy lifts to prevent secondary damage caused by insufficient oil in the gears. During the entire process of using the lift, overloading is strictly prohibited, and items around the lift should be properly placed.
The safety switches of lifts are designed according to safety requirements, including fence limit switches, upper and lower limit switches, counterweight switches, anti breakage rope protection switches, etc. However, some construction sites have cancelled those limit switches or failed to repair them in a timely manner after damage occurred in order to save time. Therefore, when using aluminum alloy lifts, it is necessary to strictly follow the maintenance and operation of the lift, regularly check the safety and reliability of each safety switch, and prevent accidents from occurring.
If there is a problem during maintenance, immediately disconnect the power supply of the driving force switch. After the lift is lifted, the aluminum alloy lift should be firmly fixed before maintenance can be carried out. It is prohibited to carry out actual operations when there is a malfunction to prevent safety accidents.
When working outdoors, if the environment is too harsh, the application personnel should fasten the steel wire rope. The working voltage of the aluminum alloy lift circuit system is 24V. Non professional maintenance personnel are not allowed to open the power box for safe use of electricity.
Your message must be between 20-3,000 characters!
