Lifts are commonly used lifting platforms in our daily work. What are the advantages of guide rail platform elevators? Below is a detailed explanation for everyone.
Advantages of Civil Engineering
1. There is no need for a machine room above the shaft, and it can be installed at a height of 3.5 meters or more on the top floor.
2. The computer room can be located within a radius of 15 meters from the shaft, occupying an area of only 3-4 square meters.
3. Hydraulic lifts do not have counterweight devices to improve the utilization rate of shaft area.
4. The load and load-bearing capacity of hydraulic lifts are directly applied to the foundation pit through oil cylinders, and the shaft strength requirement is low. Brick or brick concrete structure shafts are sufficient.
Security and stability advantages
1. Overflow valve: can prevent excessive system pressure during upward movement;
2. Emergency manual valve: In the event of a power failure, it can cause the elevator car to descend to the nearest floor position and open the door;
3. Manual pump: When the system malfunctions, the manual pump can be operated to pump high-pressure oil to lift the elevator car to the nearest floor position;
4. Oil temperature protection of fuel tank: When the oil temperature in the fuel tank exceeds the standard set value, the oil temperature protection device sends a signal to suspend the use of the elevator. The lift can only be started when the oil temperature drops.
Operating cost advantage
1. Low failure rate: Due to the use of advanced hydraulic systems and good control methods, the lift operation failure rate can be minimized.
2. Low power consumption: When the hydraulic lift descends, it is driven by the pressure generated by its own weight, which greatly saves energy.
Your message must be between 20-3,000 characters!
